Tools : Torx 6 screwdriver, Torx 5 screwdriver, plastic tool such as a credit card.
->Using the torx 5 screwdriver, remove the two screws which hold the battery cover in place (circled).
->Remove the back cover,Run a credit card all the way round the edge of the housing to release the clips which hold it in place.
->Your phone should now look like below. Remove the two torx 6 screws at the top of the phone, circled in white. You can now release the front cover. It's held on by a number of clips that need to be released.
->The part circled often falls out when you remove the front cover and people can't work out where it goes. So if it falls out, this is where it goes.
->Lift the keypad part from left to right noting that this part is still attached to the phone by a ribbon connector. This attaches like a plug and socket. Simply lever it up to detach it.
->The ribbon from the LCD, circled below, is again attached like a plug and socket. Unplug this.
->The LCD screen will be held in place quite tightly by clips around the edge of the housing. Gently slide your credit card underneath the LCD screen to release it.
->You should now have the LCD screen removed.
->Reverse the whole procedure for reassembly
1 comments:
Really great ideas.Iphone
Post a Comment